Out of stock
Aluminum belay for climbing, work at height and mountaineering. It allows to secure a first, in rope diversion, rappels and up to two seconds
- Edelrid recommends its use in alpine practices, climbing or vertical work at height . Simple and dynamic ropes according to EN 892 should be used to secure the first. Only static ropes should be used to secure the climber climbing with rope diversion (top rope) or to lower or rappel. To secure both on the rise and in abseiling for all ropes from 7.8 to 10.5 mm.
- Bearer made of a multiple piece of aluminum to perfectly secure the first and can be used to independently carry up to 2 seconds at the same time when climbing in a rope of three.
- The geometric design of the Kilo Jul offers two securing or lowering speeds and the single buttonhole allows one second to be secured.
- Use between -30ºC and 60ºC is recommended. With occasional use without noticeable wear and in optimal storage conditions Edelrid recommends a 10-year shelf life. Warm water is recommended for cleaning.
|Season of use||Summer|
|Ecological note (0 to 5)||1 🌱|
Write Your Own Review